วันพุธที่ 28 ตุลาคม พ.ศ. 2552

Water Fuel Cars - Installing a Hydrogen Booster

A hydrogen booster is a device that increases the mpg performance of a car or motorcycle, diesel and gasoline engines. He does this by using some current from the battery of the vehicle, referred to water in a mixture of hydrogen and oxygen gases break hydroxy gas, which is then added to the air drawn into the engine, the catalyst and improving in this way its performance.

The hydroxy gas improves the quality of the combustion of fuel in the engine: aBetter combustion means an increase in engine power. But it has also been found to clean the old carbon deposits from inside the engine, reduces unwanted emissions and improves the mpg under all driving conditions. It produces two benefits: you increase your car mileage and it helps in the reduction of gas emissions.

This hydrogen booster is easy to make and the parts do not cost much. The technical performance of the device is very good as it normally produces1.7 liters hydroxy gas per minute at a very low power consumption. This amount of gas is the normal output for a cell. If you have a 9-cell unit would you have 9 times that amount of hydroxy gas, roughly speaking. Some security measures should be taken when installing the unit as it is an explosive gas.

The hydrogen booster is often cited as a hydroxy booster and consists of a small container of distilled water with a conductive additive. When an electric current is passed throughThe result is a mixture of water: hydroxy gas. These hydroxy gas improves the quality of the burn inside the combustion chamber while reducing CO2 and other harmful emissions coming from the exhaust. This improvement in burn quality makes the engine run more smoothly and, while they have implemented reduction of carbon deposits in the course of life. The hydroxy output of the booster replaces a portion of the gasoline normally consumed by the machine. Typical mileage gain resultsaverage was around 20% with this device.



0 ความคิดเห็น:

แสดงความคิดเห็น